Photo Gallery

Local Utility Company Installations

They included mounting a Motorola VRM650, DC-AC inverter for the laptop, a Charguard CG12D timer/overload protection and a complete Gamber Johnson mounting system.  The mounting system included a base (DS52 pictured),an upper tube assembly, articulating arm, Notepad IV laptop mount and a Gamber Johnson printer mount with a Pentax PocketJet printer.  These setups were installed in many WE Energies vehicles, the one pictured is a International Series 4900, but I also installed them in Chevy & Ford Pickups and International 4300 series.  MCS has the experience you want and need to have the tough install jobs completed properly and with great quality.  That same quality is used when doing a simple dashmount install or a complete wireless network.


Gamber Johnson laptop mount with printer


Motorola VRM w/ Inverter


VRM, Inverter & Chargeguard

The following images are from a point to point microwave network that was installed throughout the greater Milwaukee, WI area.  Rooftops and towers were used to connect over a dozen buildings in the area.  This gave the customer blazing speed, reliability and ownership of the network.  This is the type of work that MCS can do for you, engineering is also available.


45 megabit panel antenna @ 5.8GHz


2 panel antennas for a point to point hop


Proxim Tsunami 45 megabit radios


45 megabit panel and two Proxim 20 megabit Quickbridge radios located on a ski hill in southern Milwaukee, WI


Several Proxim Quickbridge radios for a point to point system throughout Milwaukee area

The following images are from an installation at a county correctional facilty.  This project was taken over midway through by me.  I finished the install and now this jail has one of the best communications systems around.  Not only do they have all of their own channels here, the local sherrif, police, fire and maintenance are all available.  The departments that were VHF can still be communicated to in UHF via the Cross Band Repeaters that were esentially made by me using a GR500 chassis, a M1225, a R1225 and a R.I.C.K.


Equipment racks with MTR2000s, Cross Band Repeaters and M1225s


Andrew cellular Bi-Directional Amplifier in the upper left corner


Antenna line grounding coming in from tower.  All are grounded with appropriate Polyphaser unit.


All 1/4" Superflex jumpers coming and going to the TX/RX cavity rack


Cross Band Repeaters